# Add support for buses in schematics

**URL:** <https://librepcb.discourse.group/t/add-support-for-buses-in-schematics/28>\
**Category:** Improvement Ideas\
**Created:** [December 14, 2018, 7:30pm UTC](https://librepcb.discourse.group/t/add-support-for-buses-in-schematics/28 "2018-12-14T19:30:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![import](https://avatars.discourse-cdn.com/v4/letter/i/4da419/32.png) [@import](https://librepcb.discourse.group/u/import)\
**Post date:** [December 14, 2018, 7:30pm UTC](https://librepcb.discourse.group/t/add-support-for-buses-in-schematics/28/1 "2018-12-14T19:30:10Z")

</div>

_From @ubruhin on Sat Jun 23 2018 16:46:22 GMT+0000 (UTC)_  
  
I think we need to add support for buses some day 😉

@ouabache wrote in [Loading connectivity objects from a library · Issue #19 · LibrePCB/librepcb-rfcs · GitHub](https://github.com/LibrePCB/librepcb-rfcs/issues/19#issuecomment-399230054:)

> All schematic capture tools that I have ever used support homogeneous and some even support heterogeneous bus-symbols that let you do huge designs. Kicad is going to add support for heterogeneous buses either in V5 or V6. If librePCB wants to be taken seriously as a tool then you should support both types of buses.  
>   
> _Copied from original issue: [Add support for buses in schematics · Issue #20 · LibrePCB/librepcb-rfcs · GitHub](https://github.com/LibrePCB/librepcb-rfcs/issues/20)_