# BOM table is not getting updated for the packages generated by me

**URL:** <https://librepcb.discourse.group/t/bom-table-is-not-getting-updated-for-the-packages-generated-by-me/540>\
**Category:** Help\
**Created:** [May 29, 2023, 3:19pm UTC](https://librepcb.discourse.group/t/bom-table-is-not-getting-updated-for-the-packages-generated-by-me/540 "2023-05-29T15:19:27Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kapila](https://avatars.discourse-cdn.com/v4/letter/k/73ab20/32.png) [@kapila](https://librepcb.discourse.group/u/kapila)\
**Post date:** [May 29, 2023, 3:19pm UTC](https://librepcb.discourse.group/t/bom-table-is-not-getting-updated-for-the-packages-generated-by-me/540/1 "2023-05-29T15:19:27Z")

</div>

Hi  
BOM table is not getting updated for custom packages.

 ![Screenshot from 2023-05-29 20-47-42](https://global.discourse-cdn.com/free1/uploads/librepcb1/original/1X/63c285e9f2abed29031611816d20adf2423114eb.png)  
Regards,  
Kapila

---

<div class="post-metadata">

**Author:** ![ubruhin](https://avatars.discourse-cdn.com/v4/letter/u/c89c15/32.png) [@ubruhin](https://librepcb.discourse.group/u/ubruhin)\
**Post date:** [May 30, 2023, 10:07am UTC](https://librepcb.discourse.group/t/bom-table-is-not-getting-updated-for-the-packages-generated-by-me/540/2 "2023-05-30T10:07:27Z")

</div>

Hi,

Sorry I don’t understand what you mean. What is wrong with the BOM? Please describe clearly what you expect and what actually happens.

---

<div class="post-metadata">

**Author:** ![kapila](https://avatars.discourse-cdn.com/v4/letter/k/73ab20/32.png) [@kapila](https://librepcb.discourse.group/u/kapila)\
**Post date:** [May 31, 2023, 9:11am UTC](https://librepcb.discourse.group/t/bom-table-is-not-getting-updated-for-the-packages-generated-by-me/540/3 "2023-05-31T09:11:19Z")

</div>

Continuing the discussion from [BOM table is not getting updated for the packages generated by me](https://librepcb.discourse.group/t/bom-table-is-not-getting-updated-for-the-packages-generated-by-me/540):

Hi Ubruhin,  
I am a slow learner. I have created common mode inductor for filter application in my library. I have used in schematic. CML1, L1, L2 are not getting updated in BOM and also the connections links are not occurring. I am not being able to make make layout. What mistake has occurred. Pl see the screen shots.  
Regards,  
Kapila

 ![Screenshot from 2023-05-31 14-24-53](https://global.discourse-cdn.com/free1/uploads/librepcb1/original/1X/390c8ecbaa2eb18b221543248101f28c95e3c64b.png)  
 ![Screenshot from 2023-05-31 14-35-57](https://global.discourse-cdn.com/free1/uploads/librepcb1/original/1X/1d71e0f5f1e671908b42d545933838ba4ecff0d7.png)  
 ![Screenshot from 2023-05-31 14-37-02](https://global.discourse-cdn.com/free1/uploads/librepcb1/original/1X/1476e174d6f16e692d07210421a862b2b1686fd3.png)

---

<div class="post-metadata">

**Author:** ![ubruhin](https://avatars.discourse-cdn.com/v4/letter/u/c89c15/32.png) [@ubruhin](https://librepcb.discourse.group/u/ubruhin)\
**Post date:** [June 5, 2023, 6:36pm UTC](https://librepcb.discourse.group/t/bom-table-is-not-getting-updated-for-the-packages-generated-by-me/540/4 "2023-06-05T18:36:45Z")

</div>

Your footprints looks like it does not have any pads so you need to add pads. Also make sure in the device to connect these pads. Then remove and re-add this component from your project to get it updated.