# Make connections on schematics

**URL:** <https://librepcb.discourse.group/t/make-connections-on-schematics/582>\
**Category:** Help\
**Created:** [September 19, 2023, 1:15pm UTC](https://librepcb.discourse.group/t/make-connections-on-schematics/582 "2023-09-19T13:15:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![iw2evk](https://yyz2.discourse-cdn.com/free1/user_avatar/librepcb.discourse.group/iw2evk/32/418_2.png) [@iw2evk](https://librepcb.discourse.group/u/iw2evk)\
**Post date:** [September 19, 2023, 1:15pm UTC](https://librepcb.discourse.group/t/make-connections-on-schematics/582/1 "2023-09-19T13:15:39Z")

</div>

Hi all,  
i’ve installed today the software and i’ve tried to create a schematic.  
What is the right way for place connections from components and signal lines?  
(E.g on Circad it’s called signal dot)  
Thanks  
Roberto  
Milan

---

<div class="post-metadata">

**Author:** ![ubruhin](https://avatars.discourse-cdn.com/v4/letter/u/c89c15/32.png) [@ubruhin](https://librepcb.discourse.group/u/ubruhin)\
**Post date:** [September 20, 2023, 8:13pm UTC](https://librepcb.discourse.group/t/make-connections-on-schematics/582/2 "2023-09-20T20:13:26Z")

</div>

Hi,  
I’m not sure if I understand your question correctly. Creating connections in schematics should be pretty clear, just use the “Draw Wire” tool: [https://librepcb.org/docs/quickstart/create-project/schematics/#draw-wires](https://librepcb.org/docs/quickstart/create-project/schematics/#draw-wires)